8
15
BASIC OPERATION
PREPARATION
1) Before turning on, check whether all the connection are correct and reliable. Insert the power plug
into the corresponding power socket.
2) Press the STANDBY button on the front panel to turn on the player.
3) Press the OPEN/CLOSE button on the remote control or panel to carry the disc tray outside, put the disc
into the tray, press the OPEN/CLOSE button again, this unit starts reading and playing.
MUTE
In play status, if the MUTE button is pressed, there will be no audio output, the sound is eliminated, but the
image will still be played normally. Then press this button again or press the VOL. +/- button to exit the
mute status. The sound resumes to its normal status.
STATUS DISPLAY
In play status, press DISPLAY button, the TV screen will display the following data:
VCDitems: single elapsed, TR(track remain), total elapsed, DR(directory remain), display off.
CD items: single elapsed, TR(track remain), total elapsed, DR(directory remain).
DVD items: title elapsed, title remain, chapter elapsed, chapter remain, display off.
CHANNEL/LANGUAGE SELECTION
In playing VCD, DVCD, press L/R/LANG button to select the multiple output modes such as Mono L,
Mono R, Mix-mono, Stereo. Press the button once to switch one soundtrack.
In playing DVD, press L/R/LANG button can select multiple languages for playback.
(Only applies to the discs like DVD recorded in multiple languages. )
FAST FORWARD & FAST BACKWARD
In play status, press TUNE-
7
button or TUNE+
8
, there will be different speeds of fast forward
and fast backward, as shown below:
FORWARD X 2, FORWARD X 4,
BACKWARD X 2, BACKWARD X4, BACKWARD X8, BACKWARD X16, BACKWARD X32, PLAY
FORWARD X8, FORWARD X16, FORWARD X32, PLAY
PREVIOUS & NEXT
In play status, press CH-
9
button, the song/item will skip to the previous one for playback,
press CH+
:
button, the song/item will skip to the next one.
SUBTITLE SELECTION
When the played DVD disc records multiple subtitles, you can make selection of subtitle language
by pressing SUBTITLE button, they are: English, French,
Spanish, Chinese, Japanese,
Korean and Thai.
German,
BASIC OPERATION
FM RADIO OPERATION
1. Enter FM/AM Function
In the turn-on or play status, press the FM button on the front panel or on the remote control
to enter FM status. Press the FM button to switch to FM status.
2. Select Bands
1) Directly input frequency: press the T/F button on the remote controller, input the frequency
that you want directly.
2) Select band by pressing TUNE- or TUNE+ button. The frequency will go up or down.
Keep pressing these buttons and the device will switch to searching bands up or down
automatically.
3) Select band by pressing number buttons: you may select the bands that have been saved by
pressing the number buttons. For example: press 10+ button twice, 5 button once, you may
select the 25th band. Press the CH- or CH+ button, the band will be switched up or down.
4) Automatically search bands: press the SEARCH button and it will start to search bands
from lowest to highest automatically. Meanwhile the searched bands will be saved orderly.
Press this button again to stop searching.
3. Save Bands
Press the SAVE button, that means saving the current frequency of band. For example: if you
want to save 99.30MHz in 28th. Please press 10+ button twice, 8 button once, then press T/F
button to input 9 9 3, then press SAVE button to save this frequency.
4. Soundtrack Selection
Press MO/ST button, you may select Mono and Stereo soundtrack output in FM status. If the
signal is not strong enough, you can not select Stereo.
5. Exit FM Status
Press the DVD button to exit FM status and enter the disc playing.
Remark: FM Frequency range : 87.5-108.00 MHz
NOTE: You may adjust FM antenna until you get the best signal.
