Sinocare TRUE METRIX AIR, Руководство пользователя

Страница: 53 / 78

15
2. Allow vial of test strips and meter to adjust to room
temperature for 10 minutes.
3. Clean hands and area to be lanced with an approved
disinfectant. Dry thoroughly.
4. Remove one test strip from vial. Close vial immediate-
ly. Use test strips quickly after removal from vial.
5. With meter off, insert a test strip Contact End (blocks
facing up) into Test Port. Meter turns on. Keep test strip in
meter until testing is finished. To mark test as alternate site
(forearm) result if needed, press“ ” Button. ALT Symbol
appears in Display. Press “ ” Button to remove ALT
Symbol.
6. Wait until Drop Symbol appears in Display. Do not
apply samples before insert strip into meter.
7. Lance fingertip or forearm. Obtain a blood sample,
allow drop to form.
8. With test strip still in meter, touch Sample Tip of test
strip to top of blood drop and allow blood to be drawn into
test strip.
9. Remove Sample Tip from blood drop immediately
when the meter beeps.
10. After the test is finished, result is displayed. Record-
ing test results.
11. To mark the result with an Event Tag, Event Tags must
be turned on. The Event Tag icons flash. Press “ ” or “
” Button to go to the correct Event Tag. Press“ • ” Button
to set, event Tags stop flashing . Event tags can only be
marked before the strip is removed.