Sinn 103 St C, Руководство пользователя

Страница: 27 / 31

27
ADVICE
Water resistance
In its original condition, your watch fulfils the technical requirements of water
resistance according to DIN 8310. The static compressive stress of your watch is
given in bar. Each and every one of our watches is tested for water resistance.
However, in everyday use it is important to note that seals can suffer from wear
and ageing over time due to a wide range of factors which arise when wearing
a wristwatch. We therefore recommend having the water resistance checked at
least once a year. To ensure your watch retains its water resistance for as long as
possible, rinse it with tap water if it comes into contact with seawater, chemicals
or the like. Continual mechanical stress in the form of shocks and vibrations
can also not only reduce water resistance, but also increase wear and tear
of the movement. Care should therefore be taken to protect your watch from
unnecessary impacts.
Accuracy
The measured results of the watch’s rate are always “snapshots” taken under
laboratory conditions. For this reason, we also take each owner’s individual
movements into account when making a specific regulator correction. It is
therefore only possible to judge the accuracy of your watch after it has been in
operation for approximately eight weeks. In the event of a deviation, please keep
a daily record of its timekeeping over an extended period, for example one week.
Do you have any questions? Our employees will be pleased to advise you.
Telephone: + 49 (0)69 / 97 84 14 - 400
Telefax:
+ 49 (0)69 / 97 84 14 - 401
E-mail: service@sinn.de