sinmag GF-18, Руководство пользователя

Страница: 9 / 16

CLEANING AND MAINTENANCE
8
Daily Cleaning
−
Clean cover and tables with soft brush or damp cloth.
−
Empty the crumb basket.
Warning
−
Always disconnect the power supply before servicing.
−
Be extremely careful while cleaning the rear table and around the slicing
blades, as contact with blades could cause severe injury.
−
Note that the machine couldn’t be cleaned with a running water.
Maintenance
−
In normal use, the blades have to be replaced every 20 to 30 000 cuts.
On a gravity machine, it is recommended to replace the blades earlier to
get the maximum efficiency.
−
To test the sharpness of the blades, check the center of the frame where
they are more often worn out. At both side of the frame they are probably
always sharp.
−
A bread which is cut with worn out blades, crash against the crust of the
bread and then the soft part will be slowly broken. In any case the
number of the rolled soft particles between the bread slices will be
increasing.