Singxer SDA-2 Скачать руководство пользователя страница 3

11.  Sample  rate  display:  PCM  is  from  44.1Khz  up  to  384Khz,  DSD  is  from  2.82Mhz  up  to 

24.57Mhz, known as DSD64 up to DSD512 

12. The three buttons at the middle of front panel are INPUT, D‐filter, and PRE‐OUT; Among 

them, the PRE‐OUT button needs to be pressed and hold for 2 seconds for mode switching. 
At the right side, you can see a knob which has three functions: 1. Adjusts output volume 
level by rotating the knob; 2. Mutes audio output or restores audio from mute by single 
pressing the knob, OLED will display MUTE in mute mode; 3. Hold and press the knob for 
2 seconds will switch the SDA‐2 to standby mode, OLED screen will be off and the standby 
indicator on the right side of OLED screen will light up, you can press any button to exit 
standby mode. In the standby mode, only the audio output is turned off whilst the internal 
circuit is still working as normal. 

13.  The  function  key  of  our  prepared  remote  control  mirrors  each  function  of  mentioned 

buttons or knob above. The PRE key needs to be pressed and hold for 2 seconds in order 
for switching output volume mode between FIX and PRE, V+ is for volume increase, V‐ is 
for volume decrease, MUTE is for mute function, POWER is for standby function, and the 
white one is the LED indicator. Those three keys named as PLL, Bri, and INV are reserve 
keys which have no effect on the SDA‐2. 

SDA-2 解码耳放前级一体机快速使用手册 

1.

 

拿到机器后,请先检查机器外观是否完整,配件是否齐全。 

2.

 

接入电源线,开机前请检查电源电压是否合适,输入电压有 2 种,标签
110V/220V,对应的电压是 115V/230VAC;插入电源插头,打开电源开关,电
源插座的灯亮起。 

3.

 

插入 USB 线,连接电脑或者数字播放器,USB 需要带 5V 的电源。WINDOWS 系
统需要安装我们提供的驱动程序,WIN10 最新版本可以免驱使用,但是推荐
使用我们提供的驱动;LINUX 和 MAC 自带驱动,不需要另外安装驱动。 

4.

 

电脑或者数字播放器识别到 SDA-2 之后,设置播放器,选择 SDA-2 作为输出
设备;点击播放,SDA-2 显示对应的采样率。 

5.

 

多数播放器设置正确才能播放 DSD;如果 DSD 采样率显示不对,大部分情况
是 DSD 播放设置问题;设置步骤请参考我们的其他文档。 

6.

 

SDA-2 的前面板采用 OLED 屏显示各种信息,没有触摸功能;一共 5 个区域显
示,分别是数字滤波器(D-filter),模拟输出状态 PRE,音量 VOL,输入源和
采样率。 

7.

 

数字滤波器在 PCM 模式下有 6 种,分别是 SHARP/SLOW/S-sharp/S-slow/NOS/

 

 

       

Low-dispersion ;DSD模式下只有NOS 一种。 

8.

 

模拟输出状态:FIX 模式表示后面模拟输出(XLR 和 RCA)为固定电平;模式
切换的时候需要长按 RPE 键 2 秒,单按的时候闪烁;PRE 为前级模式,采用
模拟音量的控制方式,音量控制是和耳放的音量是共用的,使用的时候请注意
音量的大小。 

9.

 

音量 VOL:音量大小为 0-90,最大为 90,即 0dBFS,1 格代表 1dB,最大衰减
是-90dB;0dBFS 的时候电平大小等于 FIX 模式下的。 

Содержание SDA-2

Страница 1: ...Electronic Co Ltd 地址 中国广东省广州市番禺区新造镇 Address Xinzao Town Panyu District Guangzhou City Guangdong province China 电话 180 7881 2020 Phone number 86 180 7881 2020 联系人 陈先生 Contacts Mr chen E mail leter singxer com E mail leter15 foxmail com Skype leter singxer com ...

Страница 2: ...e refer to our other support documents for any detail 6 The front panel of the SDA 2 displays visual information via an OLED screen on the left side no touch function There are 5 aspects of information which are digital filters D filter analog output volume mode FIX or PRE volume level current input source and sample rate 7 Digital Filters There are 6 digital filters in PCM mode SHARP SLOW S sharp...

Страница 3: ... knob above The PRE key needs to be pressed and hold for 2 seconds in order for switching output volume mode between FIX and PRE V is for volume increase V is for volume decrease MUTE is for mute function POWER is for standby function and the white one is the LED indicator Those three keys named as PLL Bri and INV are reserve keys which have no effect on the SDA 2 SDA 2 解码耳放前级一体机快速使用手册 1 拿到机器后 请先检...

Страница 4: ...示灯 PLL Bri INV 三个键功能为备用键 在 SDA 2 上面无 作用 SDA 2 HDMI I2S jumper setting table SW Describe ON Silk screen PS Audio Audio GD MATRIX HOLO Audio GUSTARD L K S SW1 DSD_ON OUTPUT FOR PIN13 DSD ON 使能引脚 PIN13 输 入 HP13 OFF OFF OFF OFF SW2 DSD_ON OUTPUT FOR PIN14 DSD ON 使能引脚 PIN14 输 入 HP14 OFF OFF OFF ON SW3 DSD_ON OUTPUT FOR PIN15 DSD ON 使能引脚 PIN15 输 入 HP15 OFF OFF ON OFF SW4 DSD_ON OUTPUT FOR PIN16 DSD ON 使...

Отзывы: