SINGULARITY COMPUTERS WRAITH 2.0, Руководство пользователя

Страница: 15 / 17

Revision 1.00
14
Drive Installation
There are 9 mounting positions for 2.5” drives, 8 on the Front Cable Cover and one more on the Bottom
Panel under the Vertical GPU Mount. To install drives onto the Front Cable Cover you may not need to
remove it because you can reach around the back. If you need to remove it then you will need to undo
it from the manifold not from the front. Undo the 5 fasteners from the back of the manifold and
remove the entire Cable Cover assembly together with the Stand Offs. Then you can easily access the
rear of the Front Cable Cover to install your drives. There are two mounting orientations for 2.5” drives
on the Front Cable Cover, one is for aesthetics and the other is for maximum drive capacity. For the
aesthetics configuration you can lay two drives flat. For the maximum capacity configuration install
the drives on their edge.
Wraith 2.0 also has one 3.5” drive position in-front of the GPU for a side mounted 3.5” drive.
Drive Configuration 1
Drive Configuration 2