Singer VAPOR OUT SDHM-16L, Инструкция по эксплуатации, Страница: 29 / 68

29
ENGLISH
prior to re-use of recovered refrigerant. It is essential that electrical power sup-
ply is available before the task is commenced.
a) Become familiar with the equipment and its operation.
b) Isolate system electrically.
c) Before attempting the procedure, ensure that:
•
mechanical handling equipment is available, if required, for handling re-
frigerant cylinders.
• all personal protective equipment is available and being used correctly.
• the recovery process is always supervised by a competent person.
• recovery equipment and cylinders conform to the appropriate standards.
d) Pump down refrigerant system, if possible.
e)
If a vacuum is not possible, make a manifold extraction so that refrigerant
can be removed from various parts of the system.
f) Make sure that cylinder volume is suf fi cient before recovery takes place.
g) Start the recovery machine and operate in accordance with instructions.
h) Do not over
fi ll cylinders (no more than 80 % volume liquid charge).
i) Do not exceed the maximum working pressure of the cylinder, even tem-
porarily.
j) When the cylinders have been fi lled correctly and the process completed,
make sure that the cylinders and the equipment are removed from site prompt-
ly and all isolation valves on the equipment are closed off.
k) Recovered refrigerant shall not be charged into another refrigerating sys-
tem unless it has been cleaned and checked.
18. Labelling
Equipment shall be labelled stating that it has been decommissioned and emp-
tied of refrigerant. The label shall be dated and signed. For appliances con-
taining
fl ammable refrigerants, ensure that there are labels on the equipment
stating the equipment contains fl ammable refrigerant.
19. Recycling
When removing refrigerant from a system, either for servicing or decommis-
sioning, it is recommended good practice that all refrigerants are removed
safely.
When transferring refrigerant into cylinders, ensure that only appropriate re-
frigerant recovery cylinders are employed. Ensure that the correct number
of cylinders for holding the total system charge is available. All cylinders to