6
ENGLISH
BEFORE USING YOUR KETTLE
If you are using the kettle for the
fi
rst time, it is recommended that you clean your kettle before
use by boiling a full kettle of water twice and then discarding the water.
NOTE: The max capacity of kettle is 1.7L.
USING YOUR WATER KETTLE
1. To
fi
ll the kettle, remove it from the power base and open the lid by pressing Lid Release
button,
fi
ll with the desired amount of water, and then close the lid. Alternatively, the kettle may
be
fi
lled through the spout. The water level should not exceed MAX marks or sit below MIN
level. Too little water will result in the kettle switching off before the water has boiled.
NOTE:
Do not
fi
ll the water over the maximum level, as water may spill out of the spout when
boiling. Ensure that the lid is
fi
rmly in place before plugging the power outlet.
2. Lay the kettle on the power base and connect the plug into a power outlet.
NOTE:
The power base can be rotated by 360 degree to facilitate the plug connecting with
power outlet.
3. Press down the On/off switch to “I” position, the working indicator will light up, and then it
will start to boil the water. The kettle will switch off automatically once the water has boiled.
You may shut off the power by pressing the “0” position or lift the kettle from the base at any
moment to stop the boiling process. If necessary, it will take you 30 seconds to wait for before
you press the switch again to re-boil water.
NOTE:
Ensure that switch is free of obstructions and the lid is
fi
rmly closed.The kettle will not
turn off if the switch is constrained or if the lid is open.
4. Lift the kettle from the power base and then pour the water.
NOTE:
Operate carefully when pouring the water from your kettle as boiling water may result in
scald, besides, don’t open the lid while the water in the kettle is hot.
5. The kettle will not re-boil until the switch is pressed again. The kettle may be stored on the
power base when not in use.
NOTE:
Ensure power supply is turned off when kettle is not in use.
BOIL-DRY PROTECTION
Should you accidentally let the kettle operate without water; the boil-dry protection will
automatically switch off the power. If this occurs, allow the kettle to cool before
fi
lling with cold
water to re-boil.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the power outlet before cleaning.
1. Never immerse the kettle, power cord or power base in water, or allow moisture to contact
with these parts.
2. Wipe the appearance of body with a mild and damp cloth or cleaner, never use the toxic
cleaner.
Содержание SWK-900INOX
Страница 2: ...GB ENGLISH 3 GR EΛΛΗΝΙΚΑ 8 BG БЪЛГАРСКИ 14 ...
Страница 19: ...19 NOTES ...