Popcorn (100g)
11
MENU COOK
For food or the following cooking mode, it is not necessary to program the duration and the cooking
power. It is sufficient to indicate the type of food that you wish to cook as well as the weight of this food.
1.
In waiting mode, place food into oven, and close it.
2.
Press the individual icon pad once or repeatedly to select the weight of food to be cooked.
3.
Press START.
Auto Cook Code/Menu
PRESS FOOD ICONS
NOTE
1. For cake and popcorn, there is only one choice.
2. For beverage and potato, number of choice indicate amount not
weight.
3. For chicken, oven pauses and sound beeps in the middle of cooking
time to remind the user to turn over food for uniform cooking
4. Voltage fluctuation and some other factors may cause food not done
well, in such case, adjust the cooking time manually.
5. For Spaghetti add boiling water before cooking.
Pizza (g)
Potato (230g/amount)
Reheat (g)
Spaghetti (g)
Cake (475g)
Beverage (200ml/amount)
Chicken (g)
OTHER CONVENIENT FEATURES
Minute Timer
To use the timer feature, as when you need to be reminded of the cooking or some other things,
1.
Press TIMER/CLOCK pad.
2.
Use the number pads to enter the time to be counted down.
3.
Press START pad.
NOTE: When the countdown ends, the unit will beep.
Timer countdown can be seen in the display for 5 seconds before the clock or cooking time display
returns. The timer will continue to count down even though it is not displayed.
To check the status of the count down, press the TIMER/CLOCK pad once.
CHILD PROOF LOCK
The child proof lock prevents unsupervised operation by little children.
To set the child proof lock: In standby mode, press and hold CANCEL button for 3 seconds, then a beep
will sound and the indicator light will turn on. In the lock state, all buttons are disabled.
To cancel the child proof lock: Press CANCEL button for 3 seconds, then a beep will sound and the
indicator light will turn off.
OVERHEATING PROTECTION
When the system enters into super high temperature protection status, the digital display shows “E01”
and continues to beep till the system comes back to normal condition and then press “CANCEL”.
LOW TEMPERATURE PROTECTION
When the system enters into super low temperature protection status, the digital display shows “E02”
and continues to beep till the system comes back to normal condition and then press “CANCEL”.
SENSOR MALFUNCTION PROTECTION
The system enters into protection mode when the system sensor is Short Circuited. The display shows
“E03” and continues to beep until pressing “CANCEL” button. Call consumer service to check and
replace the faulty sensor.
