Singer SHG 6203, Инструкция по эксплуатации

Страница: 7 / 124

5
GBR
USING THE APPLIANCE
Steam ironing
The cord hose (T) may become hot during a long ironing session.
- When plug in, the power indicator light which on panel will start flashing, then the
product come into standby status, and press the power indicator button, the product
will start working.
- The system may occasionally produce a pumping sound during steam ironing. This is
normal and tells you that water is being pumped into the steam tank.
1- Make sure there is enough water in the water tank...
-
Steam ironing is only possible at higher ironing temperatures (higher than ).
- When the minimum level in the detachable water tank (H) has been reached, the
“water tank lower water indicator light (P) will flash as alarm. It tells you need fill water
into the detachable water tank (H). The lower water indicator extinguish when you fill
water into the detachable water tank (H).
2- Press the steam button (A) to start steam ironing
3- Pull up the steam trigger (B) to start continuous steam.
4- Turn-on the steam control knob (O) for adjust steam.
During steam ironing, the Steam indicator light goes on from time to time to
indicate temperature and pressure.
The opening and closing of the steam valve in the steam station will cause a
clicking sound. This is perfectly.
Ironing without steam
- Start ironing without pressing the steam station.
After ironing
- Put the iron on the stand.
- Switch the appliance off.
- Remove the mains plug from the wall socket and let the iron cool down.
FEATURES
Vertical steaming
Never direct the steam at people.
You can steam iron hanging curtains and clothes (jackets, suits, coats) by holding the iron
in vertical position and pressing the steam activator.
CLEANING AND MAINTENANCE
After each use
Never immerse the iron in water nor rinse it under the tap.
- Clean the iron with a damp cloth.
- Wipe scale and any other deposits off the soleplate with a damp cloth and a non-
abrasive cleaning agent.
Calc Clean
Never remove the Calc-Clean rinsing cap and unscrew the Calc-Clean rinsing plug when
the steam tank is hot.
VERY IMPORTANT:
Rinse the boiler once a month or after every 10 times of use to
prevent damage to your iron.
SHG 6203_Instruction Manual.indd 5 14.05.2012 19:00:13