Singer QUANTUM QUILTER 7350, Рабочая тетрадь

Страница: 12 / 25

10
BOBBIN WORK
Threads, ribbons or fine trims that are too large for the eye of the needle can be
placed in the bobbin. Wind the thread, ribbon or trim onto the bobbin and sew
with fabric’s wrong side face up. The ribbon will stitch on fabric’s right side,
creating a bold, textured effect to projects.
Machine Setup
Stitch: Double Reinforced Blanket Stitch H (for sample)
Stitch I (alternative)
Stitch Q (alternative)
(Any open stitch that does not have too
much forward/reverse or side-to-side
movement works well.)
Presser Foot: General Purpose Foot C
Stitch Length: 3
Stitch Width: 7
Materials
Felt or Stabilized Fabric (for sample)
2mm Silk Ribbon
Procedure
Hand-wind ribbon onto bobbin, insert bobbin into the machine.
Place matching thread through the needle.
With wrong side of the fabric facing up, stitch a row of stitch H.
Stop with the needle in the far right position, with the needle down.
Pivot the work and stitch in the opposite direction, aligning the
stitches so that they meet the previous row in the center.
Note:
-
Use this technique to create textured effects for use in crazy quilts.
- Experiment with other stitches.