Singer Perfect Steam Plus STI-2040, Инструкция по эксплуатации

Страница: 6 / 24

6
ENGLISH
Auto shut off function
After the initial heating up process, the Auto shut off function switches the
iron off when you stop ironing, thus increasing the level of safety and saving
energy.
1. If you stop ironing for more than 12 seconds, the iron will stop heating
automatically. The indicator light (7) will start fl ashing.
2. When you begin ironing again, the iron will heat up once more.
Water tank fi lling
Unplug the iron before fi lling the water tank.
The device is designed for use with tap water. If the water in your area is hard
or semi-hard use mix tap water with distilled or demineralized water purchased
in stores, in the ratio 2:1 and 1:1 respectively (distilled water: tap water). Check
with your water supplier to determine the type of water in your area. Never
use 100% distilled or demineralized, rainwater, softened water, scented water,
water from other appliances such as refrigerators, air conditioners, dryers or
other types of home water preparation water.
Open the cover for
fi lling (4).
Set the steam regulator (3) to the position
Slowly pour water through the water inlet.
Do not
fi ll higher than “max” mark (9) on the water tank, in order to avoid
spilling out of water. The water tank should be emptied after each use.
Spraying
As long as there is enough water in the water tank, you may use the spray
button (1) at any setting during steam or dry ironing.
Press the spray button several times to activate the pump while you are ironing.
Steam ironing
Set the variable steam regulator (3) to the desired position.
Steam setting Steam regulator
High fl ow
ECO fl ow
Dry ironing