MODEL CSP1
6. Pressing
Carefully spread the area to be pressed on the Ironing
Board removing all unwanted folds.
Grasp the Pressing Plate Handle 'A' and lower the
Pressing Plate 'B' on to the Ironing Board 'C'. If steam
has been selected, it will be pumped into and
absorbed by the fabric. You may:
leave the Pressing Plate in this position for light
pressing
or
for heavier pressure, push down on the Handle until it
moves into its lowest position (Automatic Maximum
Pressure position).
After a few seconds, lift the Handle to raise the
Pressing Plate.
Regardless of the Steam Control setting, you can
produce an extra Burst of Steam to remove stubborn
wrinkles. Simply lower the Pressing Plate against the
Ironing Board and press down on the Burst of Steam
Handle 'D' and release.
NOTE: The heater in the Pressing Plate will
automatically shutoff after approximately 30 seconds
with the Pressing Plate lowered against the Ironing
Board.
11
