manualshive.com logo in svg

Singer 491D, Руководство по обслуживанию

Поделиться
Скачать
Singer 491D Скачать руководство пользователя страница 5

                              DESCRIPTION

     Class 491D Machines are high speed, rotary hook, fully automatic lubricated 
long arm flat bed lockstitch machines with drop feed and hand operated reverse 
feeding mechanism. Recommended for general stitching operations on a range of 
light to heavyweight fabrics.

                            

- 1 -

                            GENERAL FEATURES

Balanced horizontal axis rotating hook. 

Pendant link feed with feed leveling hinge pins. 

Dial type stitch regulator on feed reverse lever, 

Thread take-up lever guard. Equipped with improved head end lubrication. 

Knee lifter mechanism is integral with the machine base and oil reservoir. 

Arm top cover with oil flow indicator.

The arm is provided with a seat for mounting a light fixture.

                             SPECIFICATIONS

Needle bar stroke                                      30.5 mm - 491D200AA

                                                       36.5 mm - 491D300AA

Clearance under presser foot                            7.2 mm - 491D200AA

                                                        7.9 mm - 491D300AA 

  (Maximum lift of presser foot when raised with knee lifter - 12.7 mm) 

Maximum stitch length                                  6 S.P.I. 

Maximum speed                                          5,500 S.P.M. - 491D200AA

                                                       5,000 S.P.M. - 491D300AA 

Oil                                                    SINGER* Type "C" Oil 

Bed size                                               475 mm x 178 mm

Содержание 491D













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды