OPERATION OF YOUR PUREWATTS ELITE 300
Your Sinergex Elite 300 is designed to be easy to use.
1. Before connecting your load, please ensure that it is
properly rated for your Sinergex Elite 300. Your load
should be rated at 230V AC 50Hz or 110V AC 60
Hz, up to a maximum power consumption of 300
watts (1.3A).
CAUTION:
Attempting to run equipment that is far beyond
the operating power of your inverter may cause damage.
Operating equipment with a different AC operating voltage
may cause damage to the equipment and/or inverter.
2. Your appliance should be fitted with an approved AC
plug. Plug your appliance directly into the output
receptacle of your Sinergex PureWatts Elite 300.
3. Your Sinergex Elite 300 is supplied with two DC
connection methods – a cigar lighter and crocodile
clip cable set. Both of these connect to the positive
(+) and negative (-) terminals on the rear of the unit.
Decide which connection method suits you best and
connect the appropriate cable set to the rear of your
Sinergex Elite 300. Ensure that the terminals are
tight. (Cont’d)
Sinergex Pure Watts 300 Elite Manual
6