SINED SOLE Series Скачать руководство пользователя страница 6

The water in the tank no longer corresponds to drinking water quality! 
 

Important information 

Water  leaking  from  the  shower  head  after  turning  off  the  shower  faucet  is  not  a  defect  but  a  technical 
requirement! 

A  solar  shower  is  not  a  closed  system.  If  there  is  a  demand  for  hot  water,  cold  water  enters  the  tank  from 
below through the valve pushing out the hot water already in the top of the tank. 
The entire shower body is filled with water and serves as solar heating. 
The pressure that builds up as a result of heating can leak out of the shower head. 
 

Dismount at the end of the season 

During  the  winter  period,  the  shower  must  be  COMPLETELY  drained  of  its  water  content.  Also  during  the 
winter the shower must be disassembled and stored in a dry place. 
Failure to observe this warning may result in frost damage to the product. 
Frost damage is not covered by warranty. 

1)

 

Close the shower and remove the garden hose. 

2)

 

To drain the shower, turn the mixer back to the "ON" position (approx. 2 minutes) and open the drain 
plug. 

3)

 

Remove the fixing screws on the base and drain the remaining water from the bottom of the shower by 
tilting the shower (this is absolutely necessary!). 
 

Cleaning 

Use  commercially  available  cleaning  agents  for  cleaning.  Do  not  use  cleaning  agents  containing  solvents, 
abrasive cleaners or hard sponges, brushes, etc. 
 

Warranty 

The provisions in force in the European Community shall apply. 

 
Production: Starmatrix Group Inc. 
Address: 253 Mengxi Road 
Zhenjiang, Jiangsu, CHINA  
 
Made in China Imported in Italy by M.P.C. srl Via Pulci 15 20126 Milano Italy Tel +39 02 47758004 e-mail 

[email protected] 

website www.sinedtechnology.com  

 
The trademark SINED and the logo SINED are registered by SINED VENTAS ONLINE S.L.U. EUTM 018196373  

Отзывы: