Specification
Model n.
STUFA-INFRAROSSI-PARETE-2000
CH20A11CWR1
STUFA-INFRAROSSI-TERRA-2000
CH20A11CSR1
Installation
Wall mounted
Standing
Voltage
230-240V~, 50Hz
230-240V~, 50Hz
Power(W)
2000
2000
Installation
Wall
Standing
Product size(mm)
596*135*320
Heater size: 596*135*320mm
Base in dia. 500mm
Height of assembled set:2100mm
Insulation
Class I
Class I
Water proof
IP65
IP65
IMPORTANT INFORMATION
Please read the operation manual carefully before installing and using the infrared heater.
This user manual contains important information about your safety, as well as some recommendations on
the correct use of the device and its maintenance.
Keep the operating manual together with the warranty certificate, the sales receipt and, if possible, the
cardboard packaging and packing material.
The infrared heater you have purchased may be somehow different from the one described in the manual,
but this does not affect how it is used and how it works.
Important precautions and instructions provided in this owner's guide do not include all possible ways and
situations you may encounter. You must understand that common sense, prudence and care are factors that
cannot be "built into" any product.
1.
SAFETY INSTRUCTIONS
•
Read the instructions before installation and use.
Certain precautions must be observed when using the
infrared heater. Improper operation without observing the precautions may cause damage to the health of
the user and other persons as well as damage to their property.
•
Use only the voltage indicated on the heater nameplate.
•
Connect the unit only to a properly installed power outlet with ground contact.
•
The heater must be connected to the power supply with a 2-pole circuit breaker.
•
It is strongly recommended to use a 30mA differential switch.
•
The unit must be handled with care and avoid vibration or shock.
•
Do not use the unit in areas where gasoline, paint or other flammable liquids are used or stored.
•
Do not place any clothing, towels or the like on top of the heater to dry. Risk of overheating and fire
•
Do not use the apparatus in areas where there is a particular risk of explosion.
•
Caution: To avoid burns, do not touch the surface of the unit with your hands or other body parts.
•
Do not leave the heater unattended during use.
•
Do not use this heater on a wet surface, or where it may fall or be pushed into water.
•
Do not touch a device that has fallen into water. Turn off the power and unplug immediately.
•
If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons to avoid a hazard.
•
If the heater is defective, it must be checked and repaired by the manufacturer, its service agent or similarly