Sindoh D310 Series, Руководство пользователя, Страница: 320 / 324

[Web Management Tool] 16-29
16.15 Associating this machine with an Android/iOS terminal using NFC 16
16.15 Associating this machine with an Android/iOS terminal using NFC
Setting network information of this machine via NFC
NFC is the standard for near-field communication that is used for connection between handheld terminals or
other devices several tens of centimeters away each other.
Configure a setting to support NFC on this machine. Also, set network information of this machine required
to connect an Android terminal to this machine.
Using NFC allows you to easily establish a pairing between this machine and an Android terminal simply by
placing the Android terminal on the mobile touch area on the
Control Panel of this machine.
In the administrator mode, select [System Settings] - [System Connection Setting] - [Mobile Connection Set-
tings] - [Simple Connection Setting], then configure the following settings.
Tips
-
If [System Settings] - [System Connection Setting] - [Mobile Connection Settings] - [Simple Connection
Setting] - [Enable NFC] is changed to [OFF] in the administrator mode, [User Authentication/Account
Track] - [General Settings] - [Enable NFC] is also changed to [OFF].
-
When [Network] - [Network I/F Configuration] is set to [Wireless Only] in the administrator mode, a pair-
ing is established by applying the wireless settings of this machine; therefore, [Wireless Connection
Setting] is not displayed.
Connecting an Android terminal to this machine via NFC using
Mobile for Android
This section describes how to establish a pairing by placing an Android terminal on the mobile touch area on
the
Control Panel of this machine.
0
Install Mobile for Android on the Android terminal to enable the NFC terminal setting.
0 Enable the wireless connection and NFC for the Android terminal.
0
Configure a setting to support NFC on this machine. For details, refer to page 16-29.
0 This machine and the Android terminal must be connected to the same wireless LAN environment.
1
Start the Android terminal.
Settings Description
[Enable NFC] Select whether to use NFC.
[OFF] is specified by default.
[Wireless Connection
Use Setting] Select whether to specify a method to establish a wireless connection between
an Android terminal and this machine.
The information specified in this option is applied to the NFC tag.
[Disable] is specified by default.
[Wireless
Connec-
tion
Method] Specify a method to establish a wireless connection between an Android termi-
nal and this machine.
Selecting [Individual Settings] allows you to configure detailed settings.
[Use MFP Wireless Setting] is specified by default.
[Individu-
al Set-
tings] Specify the method to establish a wireless connection between an Android ter-
minal and this machine when [Individual Settings] is selected for [Wireless Con-
nection Method].
•
[SSID]: Enter the SSID of the access point (using up to 32 bytes).
• [Authentication/Encryption Algorithm]: Select the algorithm used for authen-
tication or encryption. [No Authentication/Encryption] is specified by default.
• [WEP Key]: This is required when [WEP] is selected in [Authentication/En-
cryption Algorithm]. Select the method to enter the WEP key in [WEP Key
Input Method], check [Change WEP Key] and enter the WEP key.
• [Passphrase]: This is required when an algorithm other than [WEP], [802.1X],
or [No Authentication/Encryption] is selected in [Authentication/Encryption
Algorithm]. Select the method to enter the passphrase in [Passphrase Input
Method], check [Change Passphrase] and enter the passphrase.