5.6
Key-lock Setting
(fig.17)
Fig.17.
1) Long press "
cancel/delete
" button to enter wire controller
key-lock operation.
2) "CC" will be displayed when the central controller is enter the
key-lock function status. All the unit number will be displayed
and the smallest unit number will be blinked. Short press "
enter
" button to activate the key-lock function and press it
again to release this function. An underline will be displayed at
the key-locked unit.
3) Short press "
cancel/delete
" to leave the key-lock function
status.
E.g.:In fig 17, unit 1 is key-locked. The other units are not
activated the key-lock function.
20