6
1
2. To set the STOPPING time.
Model
R71A/E
Environment
Temperature Range
Reaching Distance
Lowest Voltage of CPU
Emitting Signal
Rated Voltage
-5 C 60 C
8m (when using 3.0 voltage, it Gets 11m)
3.0V
2.0V
~~
Remote Controller Specifications
Performance Features
Introduction of Function Buttons on the Remote Controller
1. Operating Mode: COOL
HEAT DRY
FAN only and AUTO .
2. Timer Setting Function in 24 hours.
3. Indoor Setting Temperature Range : 17 C~30 C.
4. LCD (Liquid Crystal Display) of functions.
On/Off
Fan
Swing
Air Direction
Timer On
Timer Off
Mode
Hr.
ON TIMER
Hr.
Off TIMER
SET TEMP
Auto
2.3 After setting the Timer off ,there will be a one-half second
delay before the remote controller transmits the signal to
the air conditioner.
2.2 Push the
Timer off
button again to set the time you want to
stop the operation.
2.1 Push the
Timer off
button and the remote controller will
show
OFF TIMER
, the last set time for the stopping operation
and the signal "Hr" will be shown on the Timer display area.
You are now ready to reset the time of the STOP operation.
3. Set the starting & stopping time
3.1 Push the
Timer on
button, the remote controller will show
ON TIMER
, the last set time for START operation and
the signal "Hr" will be shown on the Timer display area. You
are now ready to readjust the
Timer on
to start the operation.
3.2 Push the
Timer on
button again to set the time you want to
start the operation.
3.3 Push the
Timer off
button, the remote controller will show
OFF TIMER
, the last set time for STOP operation and
the signal "Hr" will be shown on the Timer display area. You
are now ready to reset the time to STOP operation.
3.4 Push the
Timer off
button again to set the time you want to
stop the operation.
3.5 After setting the TIMER, there will be a one-half second delay
before the remote controller transmits the signal to the Air
Conditioner.
If the same time is set for both START and STOPPING settings, the
stopping time will automatically increase 0.5hr(the set time displays
less than 10Hr) or one hour (the set time displays 10Hr or more).
To change the Timer on/off time, just press the corresponding
TIMER button and reset the time.
The setting time is relative time. That is the time set is based
on the delay of the current time.
NOTE
Sleep/Turbo
Fig. 1
Turbo