Sinclair ASH-09AQ, Руководство пользователя

Страница: 6 / 25

Name and Function of Every Button on Wireless Remote Control
Usage Method of Wireless Remote Control
between the two sides; don't drop or throw the control; don't flow any liquid
Ensure the control is aligning receive window, and there is no obstruction
Note:
●
Press this button then the unit begins
running; repress unit stop running and
ON/OFF button
ON/OFF
cancel Timer at the same time.
(Note: Cooling only units have no mode.)
●
Press MODE and run mode changes
Mode
Mode selecting button
according to following order.
“ ”
Dry
“ ”
Fan
“ ”
Heat
“ ”
Cool
Display
Display of every mode
●
Every press of , set temp. raise 1
℃
.
Under mode, set temperature can be
set between 16~30
℃
.
Under mode is between 16~30
℃
.
Under mode 16~30
℃
.
Every press of , set temp. lower 1
℃
.
Temp.
Temperature button
When transmitting and
●
Every press of the button, fan speed
Fan
Fan speed cannot be changed when Drying.
changes by following order:
PCB receives it as High speed. Note:
Low is displayed as and Medium as
, High displayed as and
Fan button
Swing
Auto Swing
by 7 swing states below.
Stop
Left and right swing button
Wireless
“ ”
Sleep
Signal transmit terminal
●
Under mode, the recommended set
temperature is 24~26
℃
.
Under mode is 19~23
℃
.
Under mode is 20~24
℃
.
Note: When unit is turned on after turning
off by wireless remote control, the control
would remember the set swing position set
●
Every press of , swing mode changes
into it or place it under direct sun burn or where there is extrimely hot.
remote
control
Auto
Auto
at last operation.
－ ４ －