manualshive.com logo in svg

Sinclair ASH-09AIM2 PT, Руководство пользователя

Поделиться
Скачать
Sinclair ASH-09AIM2 PT Скачать руководство пользователя страница 13

11

Function introduction for combination buttons

TURBO button

14

Press this button to activate / deactivate the Turbo function which enables the 

unitto reach the preset temperature in the shortest time. In COOL mode, the unit 

will blow strong cooling air at super high fan speed. In HEAT mode, the unit will 

blow strong heating air at super high fan speed.

Introduction for buttons on remote controller

LIGHT button

15

Press LIGHT button to turn on the display's light and press this button again to turn

off the display's light. If the light is turned on,        is displayed. If the light is turned

off,        disappears.

X-FAN button

16

Pressing X-FAN button in COOL or DRY mode,        the icon is displayed and the

indoor fan will continue operation for 2 minutes in order to dry the indoor unit even

though you have turned off the unit.

After energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO, FAN

or HEAT mode.

Press "+" and "-" buttons simultaneously to lock or unlock the keypad. If the remote

controller is locked,     is displayed. In this case, pressing any button,     blinks 

three times.

Combination of "+" and "-" buttons: About lock

At unit OFF, press "MODE" and "-" buttons simultaneously to switch between °C

and °F.

Combination of "MODE" and "-" buttons:

About switch between Fahrenheit and centigrade

Содержание ASH-09AIM2 PT








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды