Sinbo SS 4051, Инструкция по эксплуатации, Страница: 3 / 9

- 2 -
How to Charge
Battery Replacement
This appliance is designed for use with 2xAAA battery (1.5V) (not include). If the trimmer
motor shows down in operation or becomes less efficient, replace the battery. To replace
the battery, open off the bottom cover as shown in the picture below, insert AAA battery,
observing correct polarity, and re-fit bottom cover.
Dispose of used battens appropriately use local collection and re-cycling facilities where
available
To replace the battery
To insert the battery
NOTE:
Batteries must be inserted with correct polarity. Exhausted batteries should be removed
immediately and disposed of in accordance with the maker's recommendation.
Remove the batteries when the appliance is not in use for an extended period of time.
Do not short-circuit the terminals of the batteries or contacts inside the compartment
SHAVING
1. Remove the protective cover from the shaver head
2. Turn the slide switch to ON position 0
3. Hold the shaver head gently against the skin, and then move the lady shaver gently
against the direction of the hair
4. Move the shaver up and down or from she left to right, depending
on which movement you find most pleasant
5. TRIMMING: Push up the switch
6. Use long-hair trimmer for long hair, then use the shaving foil for
closer shave
7. Switch the device off after use and clear the head with the brush.
Clean and Care
1. To maintain your everywhere Trimmer carefully clean the cutting head each time after
use.