Sinbo SMX 2739B, Инструкция по эксплуатации

Страница: 3 / 12

- 2 -
be carried out by an approved service centre.
10. Do not immerse the appliance, the power cord or the plug in water or in any other
liquid.
11. Do not allow the power cord to hang within the reach of children, to come close to
or into contact with the hot parts of your appliance, any other source of heat or any sharp
edge.
12. If the power cord or the plug are damaged, don’t use your appliance .To avoid any
risk, these must be replaced by an approved service centre.
13. Do not put any accessories containing metal in a microwave oven.
14. Switch off the appliance and disconnected from supply before changing accessories
or approaching parts which move in use.
15. Do not touch the whisk, mixer blade or kneading hook while the appliance is in
operation.
16. Only use one attachment at a time.
17. Do not operate the appliance for more than 10 minutes at one time. Allow 30 minutes
rest before next use.
18. This appliance is not intended for use by children or other persons without assistance
or supervision if their physical, sensory or mental capabilities prevent them from using
it safely.
19. Children should be supervised to ensure that they do not play with the appliance.
20. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Using your appliance
KNEADING/BEATING/WHISKING
(See figure A)
Depending on the nature of the ingredients, the bowl (7) with its cover can be used to
prepare up to 2 kg of dough.
1. Before using for the first time, clean all parts of the accessories with soapy water
.rinse and dry.
2. Press button (2) to the release the Multifunction head (3) and raise it to a vertical
position.
3. Fit the bowl(9) onto the appliance by turning until it locks in position and place the
ingredients in it ,weighting them as indicated under the weighing function.
4. Fit the desired accessory (4),(5),(6) in the power outlet ,pushing the shaft of the accessory
home and turn it a quarter turn towards you to lock it in position.
5. Lower the Multifunction head to horizontal position (a click should be heard ).
6. Power supplied, light (4) on in the control panel, press the button POWER in control
panel to start the appliance, press the to set the time you want(1-15mins is for
chosen, the increase time, the button – decrease time)
7. Rotate the knob (1) to set the speed you want, and the appliance start working. (you