Sinbo SHC 4375, Инструкция по эксплуатации

Страница: 4 / 8

- 3 -
USAGE
Shaving Steps:
1. Use scissors to shave against the direction of hair growth (see Fig. 1.2.3) to achieve
a better shaving effect. If you need to keep the shape, install the 1, 2, 4 and 6 mm shear
attached to the scissors according to your needs.
2. Hold the handle at an angle of 45 degrees so that the knife is perpendicular to the
skin. Tighten your skin by hand to lift hair so as to help it more easily enter the knife net
and shave in the way of back and forth.
Pruning Steps
1. Use scissors to shave against the direction of hair growth (see Fig. ) to achieve a better
shaving effect. If you need to keep the shape, install the 1, 2, 4 and 6 mm shear attached
to the scissors according to your needs.
2. Hold the handle at an angle of 45 degrees so that the knife is parallel to the skin and
shave in the way of one direction.
NOTICE
1. To avoid damaging the tool bit assembly, do not press it too hard against the skin.
2. It is recommended that you should continuously use the new razor for 2 to 3 weeks
to adapt to the new razor system.
CLEANING AND MAINTENANCE
To achieve the best shaving effect, clean the product after each use.
1. Turn on the razor and rinse directly under the faucet.
2. Shake off the water and dry the razor.