Sinbo SHC 4365, Инструкция по эксплуатации

Страница: 2 / 9

- 1 -
ENGLISH
SINBO SHC 4365
RECHAREABLE HAIR TRIMMER
INSTRUCTION MANUAL
TECHNICAL SPECIFICATIONS
Power: 3W
Voltage: AC230V,50HZ
PRODUCT FEATURES
* High quality stainless steel blade,
* Powerful rotary motor
* On/off switch
* Power cord charger
* Including cleaning brush, oil, guide comb
* Built in Ni-Cd battery 1*600mA
PREPARING FOR USE
1. The appliance as supplied by the manufacture is not yet ready for use. It must be
electrically charged prior to use.
2. Insert the plug of charger into a socket. Warning! This appliance must be charged at
the specified voltage (AC230V 50Hz). While the appliance is being charged, the switch
must be set at “0” (the “0” must be visible). A charging period of 16 hours is required
before initial use.
3. After charging the appliance is ready for use. It can be used with or without the clip-
on comb attachment. To attach the clip-on comb attachment, slide it onto the cutting
head until it clicks into position. The appliance must be switched off while the clip-on
comb attachment is being attached or removed.
4. The clip-on comb attachment is easily adjustable. Simply slide it up or down the cutting
head. The hair can be cut to 4 different lengths ranging from approximately 3 mm to 6
mm. The position of the clip-on comb attachment on the cutting head determines the
length of the haircut.
5. After using the appliance, switch it off. In order to retain the load capacity of the storage
battery we recommend to use the storage battery until it is empty before reloading.
REPLACING THE CUTTING HEAD
Switch the appliance off before replacing the cutting head!
If the performance of the appliance deteriorates after extended use, despite regular
cleaning and maintenance, the cutting head should be replaced (the cutting head can be
ordered as a spare part from the Service Department).