- 2 -
Hot air outlet
Plastic Handle
Indicator
Thermostat knob
Power Switch
Truckle
Front Cover
A. Product Structure:
B. Usage:
Before using, please check if the voltage of products are the same of local place.
* Insert the plug into 220-240V/50Hz socket.
* Press the switch.
“O”position is off.
“I” position is lower power setting
“II” position is higher power setting.
SFH 6924: “I” is for 1000W, “II” is for 2000W.
SFH 6925: “I” is for 750W, “II” is for 1500W.
SFH 6926: “I” is for 1000W.
* You can change the temperature by turning the thermostat knob which from “MIN to
MAX. “ MIN “position is lowest temperature, “MAX “position is highest temperature.
Installation:
* When using stand unit, put the feet into the fix holes at the bottom of the unit. And then
fix the screws. Then you can use the unit by putting the unit on the flat place.
* When using wall mount unit, before drilling the wall make sure the area is free of
electrical wires or pipes. To fix your heater to the wall, use the appropriate screws.
Reference as the pictures below: