Sinbo SCO 5053, Инструкция по эксплуатации

Страница: 5 / 40

- 4 -
PROGRAM “PORRIDGE/Soup”
This mode is used for cooking liquid dairy porridge from various types of cereal. It is
recommended that you use milk instead of water for cooking porridge.
• Measure the cereal by using the measuring cup. Wash the cereal until the water is
clear. Do not use the pot of the multicooker for washing since you may damage its coating.
Put the cereal into the pot of the multicooker and pour cold milk.
• Place the pot inside the multicooker. Close the cover until you hear a click.
• Plug the multicooker into the socket. Do not plug the device into the socket until you
finished all the preparation steps – it may damage the multicooker.
• Press the button “Porridge/Soup” on the control panel. You will see a red indicating
lamp on this button turn on. You will see the default cooking time 01:00 on the display
screen. The program “Porridge/Soup” will start working within 5 seconds. When the
cooking is started, the cooking time will count down.
• The default cooking time for porridge is 1 hour. If necessary you may increase or reduce
the time; Press “+” or “-“ in the center of the panel, you can change the cooking time
with the range of 10 minutes to 2 and a half hours. The time step is 5 minutes. After the
cooking is finished the indicating lamp on this mode button will turn off and you will hear
a sound, the multicooker will switch into the “Keep warm/Cancel” mode automatically.
• Unplug the multicooker from the socket. This program may be used for cooking soup
as well.
PROGRAM “Fry”
• Place the pot inside the multicooker.
• Pour the oil into the pot. After the oil is boiling, put the ingredients in the pot.
• Plug the multicooker into the socket. Do not plug the device into the socket until you
finished all the preparation steps – it may damage the multicooker.
• Press the button “Fry” on the control panel. You will see a red indicating lamp on this
button turn on. You will see the default cooking time 00:25 on the display screen. The
program “Fry” will start working within 5 seconds. When the cooking is started, the
cooking time will count down.
• Please don’t close the lid during the cooking process.
• The default cooking time for fry is 25 minutes. If necessary you may increase or reduce
the time; Press “+” or “-“ in the center of the panel, you can change the cooking time
with the range of 10 minutes to 2 and a half hours. The time step is 5 minutes. After the
cooking is finished the indicating lamp on this mode button will turn off and you will hear
a sound, the multicooker will switch into the “Keep warm/Cancel” mode automatically.
• Unplug the multicooker from the socket.
PROGRAM “STEW”
This mode is same as slow cook.
• Put all the ingredients and seasoning in the pot of the multicooker. Place the pot inside