4
9.
Remove 6 attached nuts and bolts from the
back of the GS-5 (#8) to install the Headrest
(#9).
10.
Install Headrest #9 using the same 6 nuts and
bolts from that you removed from GS-5 (#8).
Do not overtighten!
11.
Remove Torx screws from upper GS-5 (#8) modules per image below using Torx Key (#1)
12.
Locate upper panels (#7) and install using the same Torx screws you removed in step 8 with Torx Key
(#1). Tighten 8 screws per diagram (4 per panel) and do not over tighten.
