Configuration Setup Menu
2. M (Mode)
This displays either for heat transfer or for ventilation mode. Please note you can only select the Mode if you have
installed the Summer kit option.
- (Heat Transfer) This will transfer the excess warm air from your heat source room to other rooms in your home.
- (Ventilation) If installed, the system will switch to source the air from outside to bring cooler air in to your home in the
summer months. The Fan speed can then be manually selected as desired.
Note: Temperature set control is disabled in function.
3. SET
= Your desired Room Temperature (available in Heat Transfer Mode only)
To adjust the set temperature use the up and down arrows.
4. RT = Room temperature
This displays the current temperature in the room the controller is situated in.
Distributed by Simx Limited
.
Z
N
,
d
n
a
l
k
c
u
A
,
e
r
u
m
n
a
P
,
7
4
3
4
1
x
o
B
O
P
Technical Support (09) 259 1662 | e: [email protected] | w: www.simx.co.nz
Lock Mode:
• To Lock the thermostat press and hold the Adjust UP and Down Icons together.
• The Lock Symbol appears in the top of the display.
• To unlock the Thermostat repeat as above.
Mode 04 Fan Motor Speed Selector
01 = Single Speed Motor
02 = Two Speed Fan Motor
03 = Three Speed Fan Motor (default)
Mode 05 Air Source
= Heat Transfer only
= Heat Transfer with Summer
To calibrate your Thermostat to operate correctly you need to enter the programming mode:
• Turn off your thermostat with the Power Off Icon.
• Press and hold the Mode and Fan Icon for 5 Seconds, then release buttons.
• Select the Mode you wish to change by pressing the Mode button again, this will step through the
Mode options as listed below. (The numbers appear in the top right corner of the display).
• The middle display is the value set for that mode.
Mode 01 - Room Temperature correction
To correct displayed.
Room Temperature (default -1).
Mode 02 -
Set to 10 (default)
Mode 03 -
Set to 30 (default)
PUB1261 ISS03 03/15
5.
Your Heat Transfer Thermostat comes with a Sleep Mode Timer. You can set the unit to either
Turn On OR Turn Off after the set time.
After selecting the time the unit will automatically save the settings if no user input is received
within 5 Seconds.
r
e
m
i
T
n
o
o
M
t
h
g
i
N
o
o
M
t
h
g
i
N
Sleep Mode: Press and hold the Mode Icon for 3 seconds, then use up or down button for confirmation.
Time On: Press and hold the Mode Icon for 3 seconds,the Moon icon glitters. Then press the Mode
Icon again, use the up and down buttons to adjust the range.
Time Off: Press and hold the Mode Icon for 3 seconds,the Moon icon glitters. Then press the Mode
Icon four times, use the up and down buttons to adjust the range.
