Preconditions
Preconditions
Aircraft：
Power Button
Smart Watch：
GPS Tracker：
Satellite Signal(GPS)
Aircraft Battery Capacity
〉5m
Follow Tracker
Watch
Signal connected
Connection distance less than 1 meter
(Please take it by your side)
1
2
1
2
3
3
（Ⅱ）Preconditions of aircraft, watch and tracker
08
08
0.
08:03:55
0m
1 2
08
0.
08:03:55
0m
Bind code ... 0
NET ID:XXX
Bind code Begin ...
Watch matches the aircraft:
Long press the watch power button and descend button until watch show the ID no.
Watch Battery Capacity
1. Turn on the aircraft before turning on the watch.
2. Turn on the watch, it’ll search and connect the aircraft until it shows the control interface.
3. After the aircraft connects watch, short press the power button on the watch, the aircraft
front red color will be on. Short press it again, the front red color will be off.
4. Dragonfly drone is not recommended to take off until it gets more than
12 GPS
satellites
and a sign of “ ”are shown at the upper left of watch screen.
5. Smart watch interface will display battery icons, the one on the top is for aircraft, the other
one on the bottom is for watch itself.
Please do not touch/move the drone when you just switch on the battery otherwise it will
cause drone`s self-checking failure..When the drone and gimbal finished self-checking and
ring "DI DI DI", you can start to take off the drone.
1.Place Dragonfly drone on flat ground before turning on the battery. The front LED lights
will shine red and rear LED lights will flash blue slowly.
2.When the rear LED lights rapidly flashes blue, Dragonfly drone is doing self-check. The
lights will come back to solid blue when the self-check is completed.
3.Keep people
5 meters
away from Dragonfly drone before starting the fly.
Match :
Make the aircraft short circuit part connected, power on the aircraft. After a few seconds,
take off the connector on the short circuit. Long Press the watch power button and descend
button until watch show the ID no, then loose the button and wait for the connection finished.
Match:
turn on watch and GPS tracker first, then use needle to stick the tiny hole on the back of
GPS tracker. The blue indicator flashes when it’s matching. And blue indicator keeps on
and “X” icon on the left bottom of watch will disappear when code-matching complete.
1. Turn on GPS tracker, when it connects 8 satellites at least, watch will display “
”
icon on the left bottom, then aircraft could be into Follow me Mode.
2. Don’t cover the tracker’s signal; don’t take tracker far from the watch. You’d
better keep tracker and watch together within 1 meter.
3. If watch displays ”X” on the left bottom, it means disconnect to tracker, far distance
between watch and tracker, or you need to match code again.
4. Please ensure that you are familiar with all functions of watch before you get into follow
me mode.
5. Please ensure aircraft is far from high-rise buildings and electromagnetic interference.
Buildings will reflect GPS signal sometimes, which will lead to aircraft crash. Always fly in
open area.
6. Notice your “follow me” path, keep away from buildings, trees and other obstacles in
case of any damage.
7. Please keep the front of GPS tracker uncovered, or it’ll make the signal unstable to let
the aircraft fly in danger.
2
3