Smart Machine Smart Decision
SIM800 Series_Bluetooth_Application_V1.02
29
2014-06-30
OK
G=?
Parameters
See Write Command
Response
If
mode
=1, the notification information is:
+BTPAIRCFG: <mode>,<pin_code>
OK
If
mode
=0 or 2, the notification information is:
+BTPAIRCFG: <mode>
OK
Read Command
AT+BTPAIRCF
G?
Parameters
See Write Command
Response
OK
Write Command
1) if PIN-Code
inputted by
manual while
pairing
AT+BTPAIRCF
G=1[,<pin_code>
]
2
）
if using random
PIN-Code while
pairing
AT+BTPAIRCF
G=<mode>
Parameters
<mode>
0 random PIN-Code, and need confirm the pairing request
1 PIN-Code inputted by manual
2 random PIN-Code, and response the pairing request
automatic
<pin_code>
PIN-Code, the length is four. default value is 0000
Note
When
mode
is 0 or 2, it is random PIN-Code
When mode is 2, it has no
+BTPAIRING
information, and response the
pairing request automatic;
When mode is 0, it has
+BTPAIRING
informtioan, and need input
AT+BTPAIR=1,1
to confirm pairing request.
The setting will be valid after reboot.
2.31.
AT+CPBFEX Find name or number in module phonebook
AT+CPBFEX
Find name or number in module phonebook
Test Command
AT+CPBFEX=?
Response
+BTVIS: (0,1),40
OK
Write Command
Response
