manualshive.com logo in svg

SIMREX DataMover ESS, Руководство пользователя

Поделиться
Скачать
SIMREX DataMover ESS Скачать руководство пользователя страница 187

IN CASE OF DIFFICULTY...

SIMREX products are designed for long life and trouble-free operation. However, this equipment, 
as with all electronic equipment, may have an occasional component failure. The following infor-
mation will assist you in the event that servicing becomes necessary.

TECHNICAL ASSISTANCE

Technical assistance for SIMREX products is available from our Technical Support Department 
during business hours (8:00 A.M.–5:00 P.M. Eastern Time). When calling, please give the 
complete model number of the radio, along with a description of the trouble/symptom(s) that you 
are experiencing. In many cases, problems can be resolved over the telephone, without the need for 
returning the unit to the factory. Please use one of the following means for product assistance:

NY Phone: 716 206-0174  E-Mail: 

[email protected]

AZ Phone: 480 926-6069 Web:

 www.simrex.com

FACTORY SERVICE

Component level repair of radio equipment is not recommended in the field. Many components are 
installed using surface mount technology, which requires specialized training and equipment for 
proper servicing. For this reason, the equipment should be returned to the factory for any PC board 
repairs. The factory is best equipped to diagnose, repair and align your radio to its proper operating 
specifications.

If return of the equipment is necessary, you will be issued a Return Merchandise Authorization 
(RMA) number. The RMA number will help expedite the repair so that the equipment can be 
repaired and returned to you as quickly as possible. Please be sure to include the RMA number on 
the outside of the shipping box, and on any correspondence relating to the repair. No equipment 
will be accepted for repair without an RMA number.

A statement should accompany the radio describing, in detail, the trouble symptom(s), and a 
description of any associated equipment normally connected to the radio. It is also important to 
include the name and telephone number of a person in your organization who can be contacted if 
additional information is required.

The radio must be properly packed for return to the factory. The original shipping container and 
packaging materials should be used whenever possible. All factory returns should be addressed to:

SIMREX Corporation
(RMA No. XXXXXX)
5490 Broadway St.
Lancaster, NY 14086 USA

When repairs have been completed, the equipment will be returned to you by the same shipping 
method used to send it to the factory. Please specify if you wish to make different shipping arrange-
ments. To inquire about an in-process repair, you may contact our Manufacturing/Service facility 
at 716-206-0174 (FAX: 716-204-0476), or via e-mail at [email protected].

Содержание DataMover ESS





























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды