Simrad PI GEOMETRY, Инструкция по эксплуатации, Страница: 22 / 40

Simrad PI Geometry
All sensors are provided with default communication channels
and update rates. Refer to the table in section
About sensor
configuration on page 20.
About sensor configuration
All sensors are provided from Simrad with predefined
communication channels and update rates.
Default communication channels and
update rates
See the table below for the initial values for the communication
channels and update rates for the various sensors.
Table 1 Default communication channels and update rates
Sensor Com.channel(s) Update rate
PI Bottom Contact 6 Normal
PI Catch 4 Normal
PI Depth Depth 300M: 16
Depth 600M: 12
Depth 1000M: 10 Fast
PI Height 14 Fast
PI Remote/Depth Depth 300M: 11
Depth 600M: 15
Depth 1000M: 13 Fast
PI Spread 2 Fast
PI Spread/Depth Depth 300M: 16
Depth 600M: 12
Depth 1000M: 10
Spread: 2 Fast
PI Twin Spread 2 and 7 Fast
PI Temperature 8 Fast
PI Geometry 1 and 5 Fast
PI SeineSounder Depth 300M: 5
Depth 600M: 9
Depth 1000M: 1
Height: 14 Fast
Changing a communication channel
It may be required to change one or more communication
channels, and there may be many reasons for this.
• You have more than one of each sensor. For example, if you
have three temperature sensors, they MUST communicate
on three different channels.
20
322482/B