Specifications
System units:
• Electronic unit with color LCD Display
• Hull mounted or portable hydrophone
• Up to 6 Sensors • Battery charger
Power supply: 10 – 32 V DC
Power drain: 15 – 18 Watts
Environment: 0 to +50ºC, Waterproof
(USC 46 CFR and IP 55)
Interfacing:1 port in/out NMEA 0183,
1 port in NMEA0183
Sensor receiver and display section
Frequency band: 43,5 – 49,5 kHz, multi -
channel DSP - receiver.
Channels: 3 or 6/30
PI32 Echosounder section
3)
Frequency: 50/200 kHz, user selectable
Output power: 500 W RMS
Detection range: Up to 350 m at 200 kHz
and 800 m at 50 kHz
Pulse length: Long, Medium and Short
Alarms: Fish, max and min depth
Zoom mode: Bottom and VRM expansion
Split screen: Depth and A – scope. Depth and
bottom expansion, depth and VRM expansion
Event marker: At current ping
Scroll speed: Adjustable or freeze
Signal threshold: User selectable on/off
Fish detection: White line discrimination
Surface sea water temp.:Transducer
1)
or NMEA. Ships speed through water:
Transducer
4)
or NMEA
PI44/54 Echosounder section
3)
Frequency: 38/50, 38/200 or
50/200 kHz, user selectable
Output power: 2x1,000 W RMS.
Pulse length: Long, Medium, Short, Automatic
Alarms: Fish, max and min depth
Zoom mode: Bottom and VRM expansion
Split screen: Depth and A-scope. Depth and
bottom expansion, depth and VRM expansion
Event marker: At current ping
Scroll speed: Adjustable or freeze
Signal threshold: User selectable on/off
Fish detection: White line discrimination
Surface sea water temp.:Transducer
1)
or NMEA. Ships speed through water:
Transducer
4)
or NMEA
Detection range PI44/54
Frequency
Beam
Fish*
Bottom*
38 kHz
13x21
O
410m
1800m
50 kHz
10x16
O
430m
1500m
200 kHz 7
O
280m
550m
*Single Fish Target Strength: -30db (60 cm Cod)
*Bottom Back Scattering Strength: -20dB
*Simrad transducer C38/200 or C50/200
1) Requires an optional echosounder transducer
with temperature sensor
2) Requires an external GPS navigator
3) Requires an optional echosounder transducer
4) Requires an optional triducer
(depth, temperature and speed)
PI Sensor (General)
Housing: Shock absorbing and abrasive
resistant Polyurethane
Corrosion resistance: All metal parts made
of high grade Titanium
Power: Rechargeable batteries
Range: ~2000 meter
Programming: Field programmable functions
and channel selection
Max depth: 2000 meter
Hull mounted hydrophone
Beam width, purse seine application:
90º horizontal, 30 º vertical
Beam width, trawl and Danish seine application:
50º horizontal, 30 º vertical
Hydrophone cable: 25 m, diameter 6 mm
terminated with 7 pins female connector
Portable hydrophone
Hydrophone for trawl and purse seine application
Strain resistant
60 m length on cable reel
Cable strength: 150 kg
Battery charger
Input voltage: 12 – 32 VDC
Fast charging
Output: 0 - 3 ADC
Note: Specifications subject to change without notice.
PI Hydrophone
PI Battery Charger
252 mm (10”) 70 mm (2.8”)
144 mm (5.8”)
134 mm (5.2”)
140 mm (
5.6 ”)
74 mm (2.9”)
72 mm (2.8”)
75 mm (3 ”)
45 mm
(1.8 ”)
100 mm ( 4 ”)
62 mm ( 2.4 ”)
206 mm (
8.1 ”)
172 mm (6.7”)
123 mm (4.8”)
245 mm (9.5”)
PI54 monitor with 15 inch screen
Weight 6.6 kg (14.5 lbs)
PI44 monitor with 10 inch screen
Weight 3.7 kg (8.1 lbs)
PI32 monitor with 6 inch screen
Weight 1.5 kg (3.3 lbs)
330 mm (13”)
95 mm (3.7”)
220 mm (8.7”)
365 mm (14.6”)
75 mm (3”)
460 mm (18.1”)
SIMRAD MARKETING - 3.000 10.05
PI Sensor
C50/200, C38/200
Combi transducers
400 mm (16”)
135 mm
(5.2”)
92 mm
(3.6”)
www.simrad.com
M A X I M I Z I N G Y O U R P E R F O R M A N C E A T S E A
