Simrad NSS evo3S, Руководство по установке

Страница: 41 / 52

Naviop
If this device is on the same NMEA 2000 network as a Naviop Loop system, this device can be
used to operate the Naviop Loop system.
For details, refer to the documentation following the Naviop system.
Mercury
If the unit is on the same NMEA 2000 network as a compatible Mercury Marine VesselView
product or VesselView Link, specific features are automatically unlocked on the unit. When
the features are enabled, the display may prompt the user for some basic configuration
information. Refer to the VesselView® manual or engine supplier for further information.
Suzuki Marine
If this device is on the same NMEA 2000 network as a compatible Suzuki product or a
compatible gateway, a dedicated Suzuki instrument panel is unlocked and automatically
enabled. Data source selection is done the same way as for any regular NMEA 2000 sources.
Yamaha
If a compatible Yamaha gateway is connected to the NMEA 2000 network, a Yamaha engine
icon is added to the Home page.
For more information about configuration information, the Yamaha panel and the data
displayed, and Troll control, refer to the Yamaha manual or the engine supplier.
Evinrude
If an Evinrude engine control head is available on the NMEA 2000 network, the Evinrude
engines can be monitored and controlled from the unit. When the feature is available, an
Evinrude icon is added to the home page.
A maximum of two control heads and four engines is supported.
For more information, refer to the engine manual or engine supplier.
Power-Pole
Power-Pole anchors
This device can interface with the Power-Pole anchors via Bluetooth.
When the anchor(s) are paired with this device, the Power-Pole button is added to the
control bar.
For more information about Bluetooth pairing and Power-Pole anchor operation, refer to the
Operator manual.
Power-Pole Charge module
This device can interface with the Power-Pole Charge module via the C-Monster gateway.
Only one gateway can work on the NMEA 2000 network at a time.
When valid data is received from the gateway, the Charge button is added to the control bar.
For more information about the battery charge functionality, refer to the Operator manual.
For installation, wiring and setup information, refer to the Power-Pole documentation
supplied with the Charge module.
FLIR camera setup
Compatible FLIR cameras are plug and play when used in conjunction with a device acting
as a DHCP host. For setup on networks not utilizing a DHCP host, refer to the website
www.simrad-yachting.com, or contact technical support.
FLIR settings can be found in the advanced settings dialog.
3rd party support | NSS evo3S Installation Manual
41