24 |
Troubleshooting |
Halo20, 20+ and 24 Dome Radars Installation Manual
No scanner
Happens when Ethernet connection is established between radar and display, but an internal
error in the scanner prevents normal radar operation.
Recommendations
•
Check supply voltage/current
•
If persistent, power cycle the system, check the scanner cable / RJ45
•
Possible internal fault with the radar, contact service
No spoke data
Happens when Ethernet connection is established between radar and display, but an internal
error in the scanner prevents normal radar operation.
Recommendations
•
Check supply voltage/current
•
If persistent, power cycle the system, check the scanner cable / RJ45
•
Possible internal fault with the radar, contact service
Error codes
If the error code repeats, please refer to list below.
Error code
Description
Recommendation
0x00000001
Radar saved settings corrupted Radar will revert to factory defaults. Re-enter
your settings including installation settings
0x0001000C
Scanner not detected
1. Check the pedestal interconnection cable
connections
2. Power cycle the radar
3. Check input Voltage
0x0001000D Transmitter overheat (soft)
1. Try changing to shorter ranges <6 NM
2. Switch to STBY, Allow unit cool
0x0001000E
Transmitter overheat (hard)
Switch to STBY, Isolate power to the radar
and contact service
0x0001000F
Signal processing error
Unit should revert to STBY. Select transmit
If problem persists. power cycle the radar
0x00010017
Scanner failure
Contact service
Power supply
0x00010010
Power supply overheating
Switch to STBY, Allow unit cool then retry
0x00010011
Power supply voltage error
Check scanner cable for connections for
corrosion or damage
0x00010012
Power supply overload
Contact service
0x00010013
Power supply hardware fault
Contact service
0x00010014
Power supply comms fault
Contact service
0x00010019
Low battery voltage (Supply
voltage low)
1. Recharge and check supply voltage
2. Restart the radar
0x00010016
LED Lighting fault
Turn accent lighting off then retry
0x00010018
Radar interface box fault
Check the interconnection cable for damage
Mechanical
0x00010001
Zero bearing sensor fault
Contact service
0x00010002
Bearing sensor fault
Contact service
0x00010015
Mechanical transmission fault
Contact service
0x00010003
Motor drive fault
Contact service
0x0001001A
Motor or antenna has stalled
Contact service
Содержание Halo20
Страница 2: ......
Страница 30: ......
Страница 31: ......
Страница 32: ... 988 12307 003 www lowrance com www simrad yachting com www bandg com ...