Simrad FM90 Скачать руководство пользователя страница 59

Страница: 59 / 140

922-00027001/2.2

Using sonar view overlays

Topics

Measuring distances, page 57

Defining an area, page 58

Placing reference cursors, page 59

Measuring distances

You can use the tape measure tool to draw a line in the sonar view and measure the distance
between two points.

Context

This button is located on the top bar.

Measures distances on the sonar view. Also allows you to place a measurement
overlay on the sonar view.

Procedure

Click the

Tape Measure

button.

Click and hold the left mouse button on your first target, then drag the mouse to your
second target.

The length and bearing between the targets is displayed dynamically.

Note

The measurement line will not remain on the display when you release the mouse button.

To keep the measurement line on the display, place a measurement overlay.

Click and hold the right mouse button on your first target.

Drag the mouse to your second target and release the mouse button.

Move the mouse to a place on the screen where you would like to place the
overlay length and bearing label.

Operational procedures

Содержание FM90













































































































































Результаты поиска

Содержание FM90

Отзывы:

Simrad FM90, Справочное руководство, Страница: 59 / 140

Результаты поиска

Содержание FM90

Отзывы: