Simrad ARGUS FMCW 3G, Руководство пользователя

Страница: 144 / 150

142 |
ARGUS FMCW radar | Argus Radar Operator Manual
FMCW device c onfiguration menu
B
A
C
D
E
F
G
H
I
This menu contains certain useful fields for setting the transceiver and other fields non-modi-
fiable by the user that describe characteristics and various data of the analyzed transceiver.
Warning: Remember to always press the Accept pushbutton to save the modifications
made, otherwise the system will not keep the modifications in its memory.
Enable the FMCW transceiver radar - A
In box A the description of the type of transceiver connected is supplied (e.g., Broadband
BR24) and its activation status (active/disabled). From this check it is possible to change the
status of the transceiver by entering a tick.
Enabling the transceiver is necessary for its utilization.
Position of the FMCW transceirer - B
Spin buttons
B
permits entering the coordinates of the transceiver’s position on the ship.
These parameters are important because reference will be made to them for all later mea-
surements that can be made by the visualized radar echoes and also because the processing
videos, such as ANTI SEA CLUTTER for example, will keep some of these data in consideration
to apply the correct radar image filters.
Range radar combination - C
Box
C
identifies a characteristic of the FMCW transceiver radars. In the table in “FMCW radar
scanner specifications” on page 139, various characteristics of the FMCW transceiver radars
utilised are described and also the possibility of using them in single or dual range. If dual
range, the transceiver can be utilised as two distinct radars and the system permits the setting
of both parts.