Simrad AP70 MK2, Руководство оператора

Страница: 22 / 52

AUTO mode (Heading hold)
In AUTO mode the autopilot issues rudder commands required to steer the vessel
automatically on a set heading. In this mode the autopilot does not compensate for any
drifting caused by current and/or wind (
A
).
A
• Switch to AUTO mode by pressing the
AUTO
key. Repress the key to highlight the
Auto
option in the pop-up menu
When the mode is activated, the autopilot selects the current boat heading as the set
heading.
Changing set heading in AUTO mode
You adjust the set heading by turning the rotary knob or by pressing the port or starboard
keys.
An immediate heading change takes place. The new heading is maintained until a new
heading is set.
Heading capture
When the vessel is turning in AUTO mode, an instant re-press on the
AUTO
key or the rotary
knob activates the heading capture function. This will automatically cancel the turn, and the
vessel will continue on the heading read from the compass the very moment you pressed
the
AUTO
key or the rotary knob.
Temporary heading changes
If you need to avoid an obstacle when in
AUTO
mode, you can press the
STBY
key and
power steer or use the helm until the obstacle is passed.
If you re-press the
AUTO
key within 3 minutes you can select to continue on previous set
heading. If you don’t respond within 3 seconds the menu will disappear, and the autopilot
will go to
AUTO
mode with current heading as set heading.
Quick menu in AUTO mode
From the Quick menu in AUTO mode you can change rudder parameters and set manual
speed.
22
Autopilot modes | AP70 MK2 Operator Manual