Simrad AP44, Быстрое руководство

Страница: 21 / 60

Course change less than set limit Course change larger than set limit
The course change limit setting depends on the autopilot
computer:
• NAC-2/NAC-3:
Course chg confirm angle
, refer to
"Steering (NAC-2/
NAC-3)"
on page 35
• AC12N/42N and SG05:
Navigation change limit
, refer to
"Automatic steering (AC12N/AC42N)"
on page 39
Turn pattern steering
The system includes a number of automatic turn steering features
when the autopilot is in AUTO mode.
Ú
Note:
Turn pattern steering is not available if the boat type is
set to Sail. Instead the tack/gybe feature is implemented.
Turn variables
All turn patters, except the U-turn, have settings that you adjust
before you start a turn or at any time when the boat is in a turn.
The turn settings are available from the Autopilot settings dialog.
The variables are described for each turn pattern option in the
following pages.
Starting and stopping a turn
Ú
Note:
For starting a DCT turn, see
"Depth contour tracking (DCT)"
on
page 21.
You start the turn by selecting the turn option in the Mode list,
followed by selecting the port or starboard options in the turn
dialog to select the turn direction.
Autopilot modes | AP44 Operator Manual
19