13
14
Filter Replacement
Step 1
Remove the power plug from the electrical
socket to turn the system off.
Step 2
Step 5
Place the filters according to the icon instru-
ctions next to the red button. Insert the new
filtersintotheircorrespondingholes,andtwist
thefilterclockwisetofitintotheplaceproperly.
Press the reset button and hold for at least 3
seconds until two beeps are heard to enter Reset
Mode. Press again to select the desired filter,
and then hold for at least 3 secondsuntil a
beep is heard; the chosen filter is reset.
Step 3
Open the feed water tank cover. Wait 5
second. Lift out the tank, empty it, and put it
in a safe place.
Press the red button above the filters; this
will push the filter cartridges outwards.
Turn each filter cartridge counterclockwise
and then lift and remove it from the
purifier.
Note: You can safely dispose of the
exhausted cartridges (non-toxic).
Step 6
Clean water Inlet Strainer –
Locate inside
the feed water tank; Turn the water level
pipe counterclockwise, and remove the
strainer from inside, clean it under running
water. Reassembly inlet strainer, fill the
feed tank with fresh potable (tap) water,
replace the top cover and fit tank back
onto the rear of the system.
Step 4
Unpack the new filter cartridges,
unscrew and remove the protective
transit covers.
Wet the ‘O’ rings with some clean
water before installation to help
lubricate.
Replacement Filter Part Number
Part No.
Description
Replacemen
t Schedule
（
Months
）
HEDPF3002-S15
CB Filter Cartridge
3-6
HEDPF1002-S15
RO Membrane Cartridge
6-12
HEDPF2002-S15
CF Filter Cartridge
3-6
Important:
After replacing the filter cartridges follow the
System Flushing
instructions (page 9) to rinse the
purifier
before
consuming any water.
Note:
Please contact our customer services for purchase options.
