Step 1 - FITTING AND POSITIONING WALL CHANNEL
4
Step 2
Place wall channel in position on the bath (20mm in from the edge of the
bath), use a spirit level to ensure that it is vertical, and mark all 4 fixing
holes on the wall.
Drill holes in the positions marked using a 6mm masonry drill bit. Insert wall
plugs (B) into all of the holes (beyond the thickness of the tile).
Fix the wall channel to the wall using 4 screws (A).
Note: Inject silicone sealant into the holes before inserting the screws
to seal the holes.
Push the pivot door into the wall channel.
Step 3
B
A
Once you have checked that the door opens and closes
correctly fix the door frame to the wall channel.
From inside, drill 4 holes through wall channel/door frame
utilizing the predrilled holes with a 3.2mm drill bit.
Fix using washers (D), screws (C) and push on the screw
covers (E).
D, C
E
O
