Simpson SWT1023A, Руководство пользователя, Страница: 20 / 36

Don’t do these things:
20
5.4
When using liquid detergent, some may leak
out of the dispenser into the wash load earlier
than expected through small openings in the
back of the dispenser.
The openings are to help flushing out of
detergent.
7. If you want to use fabric softener, see
“Add fabric softener”.
8. Close the drawer by pushing it backwards
into the top panel of the washing machine
when you have finished adding detergent.
Using too little detergent will give you a poor
wash result.
Using excessive detergent will create too
much suds and may cause overloading of the
motor during the spin stage of the wash
cycle.
To avoid excessive suds, reduce the amount
of detergent you use. It is best to use
detergent labelled low susing. Good quality,
front load detergent will perforn will in this
machine.
Use soap based products in your washing
machine.
Before adding softener to the dispenser,
make sure the siphon cap is pushed firmly
down onto the spigot in the drawer.
The softener will not siphon out if the cap is
incorrectly fitted, is missing or blocked with
residue. You are now ready to add fabric
softener.
Measure the correct amount as recommend-
ed on the softener package into a cup and
then pour it into the softener compartment of
the dispenser drawer.
Overfilling and then siphoning out too early
can cause softener and detergent to mix
resulting in staining problems.
The softener dispenser holds 90ml when filled
up to the MAX marker. Any level lower than
MAX will function correctly.
Caution: Only use the detergent
compartment for detergent and
the fabric softener
compartment
for fabric softener.
ADD FABRIC SOFTENER
Caution: Do not overfill the fabric
softener dispenser.
MAX - Do not fill above
this height
siphon cap
siphon cap
pushed down
add fabric
softener