Simpro Microstacker, Руководство пользователя

Страница: 21 / 40

User Manual // Simpro Microstacker
Original Instructions // English // v2.0 // August 2022 // Page
20
4.4.1.2 AGM battery charging
To recharge the AGM batteries, simply plug one end of the supplied IEC C13 power lead into
the socket on the machine, and the other end into an ordinary 1-phase mains power outlet.
A full charge from flat should take around 5 hours.
The onboard smart charger automatically adapts to different input currents, manages
the charging cycle to maximise battery life, and prevents overcharging.
4.4.1.3 AGM battery care
The batteries are maintenance-free and designed to last up to five years. However, battery
life is dependent on several factors, including the number of charge/discharge cycles, the
depth of discharge and environmental conditions.
To maximize the life of AGM batteries, observe the following rules.
-
Recharge the batteries regularly.
-
Do not leave the batteries in a discharged state for more than 24 hours.
-
Do not attempt to operate the machine when the batteries are flat.
-
Do not expose the batteries to extremes of temperature.
AGM batteries are supplied with a 12-month manufac turer’s warranty, separate from the
warranty on the rest of the machine.
4.4.1.4 AGM battery charger
The SME 12V Microstacker is fitted with an onboard smart charger which accepts 1-phase 85-
264V 50/60Hz input, drawing up to 3 Amps. The charger outputs 13.6V continuous direct
current at up to 10 Amps, for a maximum power output of 136 Watts.
The SME 24V Microstacker is fitted with an onboard smart charger which accepts 1-phase 85-
264V 50/60Hz input, drawing up to 3 Amps. The charger outputs 27.2V continuous direct
current at up to 5.9 Amps, for a maximum power output of 160 Watts.
On both models, the battery charger is in an enclosed plastic case and protected
against short-circuit, current overload, over-voltage, and over-temperature conditions.
4.4.2 LFP battery
The PRO Microstacker is fitted with an EL20_C 24V/20Ah LFP battery in a removable carry
case, and comes with an external charger. Additional EL20_C battery packs can be placed
on charge and exchanged as they run flat, allowing the Microstacker to be operated 24/7.
The EL20_C batteries have an integrated circuit breaker, which automatically trips out if the
voltage drops too low, or if the machine is not used for several minutes. It can be reset by
simply pressing the BATTERY SAVER button on the tiller head.
4.4.2.1 LFP battery indicator and hour meter
Some PRO Microstacker models are fitted with a battery indicator, mounted on the body of
the machine. This instrument also contains an hour meter.