Simpro Dumpmaster, Руководство пользователя

Страница: 24 / 60

4.3 Operation of controls
All personnel using the machine must know how to correctly operate the controls.
Incorrect operation may result in a safety hazard or damage to the machine.
The Dumpmaster controls are designed to allow simple, safe and fast operation of the
electro-hydraulic systems. A range of different control panels may be installed, depending
on the operational and safety requirements of the machine. Use the following table to
identify the correct operating instructions for your machine.
4.3.1 Control Panel identification
The control panel of the machine is normally atop the powerpack cover, but on some
machines it may be mounted on a separate enclosure.
Control
Panel
Primary Usage Controls Image Refer
Standard
Control
Panel
Standard
machines
-
RAISE/LOWER
-
KEY SWITCH
-
VOLTMETER (battery
machines only)
4.3.2
Autocycle
Control
Panel Machines with an
autocycle
controller
-
RAISE/LOWER
-
EMERGENCY STOP
-
CONTROL MODE
(AUTO/MANUAL)
4.3.3
VSD Control
Panel
Machines with a
Variable Speed
Drive controller
-
JOYSTICK FOR
RAISE/LOWER
-
KEY SWITCH
4.3.4
Safety-
Monitored
Control
Panel
Machines with a
PLC and safety-
monitoring systems
to comply with
13849-1:2015 and
AS/NZS4024 up to
CAT3/PL(d) or
CAT4/PL(e))
-
RAISE/LOWER
-
EMERGENCY STOP
-
CONTROL MODE
(AUTO/MANUAL)
-
SAFETY RESET
-
Panel describing
the architecture of
the safety-
monitoring systems
(CAT3/CAT4)
4.3.5