Unlock Button
Bluetooth
Power Button
Bluetooth Light
• Connect the power supply to the Luna charging port, then plug the other end into any 110V
power source. Charge Luna for 2-4 hours. The Luna is fully charged when the Bluetooth
indicator light turns off.
Note:
• Charge Luna in dry area to keep from damaging.
• We recommend fully charging Luna before you store for extended periods of time.
• When the Luna battery is low, you will hear an indicator tone notifying you to charge the
Luna.
• To turn on Bluetooth, locate the Bluetooth power button on the Luna. Press and hold
Bluetooth power button for 3 seconds until you hear a prompt sound. The Bluetooth indicator
light will blink blue when in pairing mode.
• From your music device, turn on Bluetooth and switch your device to discovery mode. Select
“LUNA” from your device options. You will hear a set tone and the Bluetooth light will become
solid blue once the Luna and your music device are paired successfully.
• Use controls on music device to select songs from playlists and adjust volume.
Note:
• Sound quality will lessen or music will stop playing when music device is approximately
30 feet away from Luna.
• The Luna can be attached to umbrella center poles up to 2” and cantilever umbrella light
adapters.
• Open Luna by holding the device firmly with one hand and then press “unlock” button with the
other hand to release the clamp lock.
• Open up the Luna light and clasp around the mid pole or light adapter. Snap to close.
2
5
Center Pole Application
Cantilever Application
Pull down light adapter
S T E P 1
Charging
S T E P 2
Pairing Bluetooth Device
S T E P 6
Attaching Luna to Umbrella
