2
1
WARRANTY:
The manufacturer warrants that this
umbrella, when subject to normal and
proper use, will be free from
manufacturing defects for a period of
one year from the original date of
purchase. Should any defect occur
during the specified time period, the
manufacturer will repair, replace, or
provide replacement parts, at its own
option. Limited warranty against fabric
fading, based on fabric grade. Warranty
is not transferable.
We will not warrant any claim coverage
unless both the original sales receipt and
request form are sent to us. Any items
that are returned for warranty or non
warranty purposes must be issued a
Return Authorization Number. Only
upon issuance of an RA # and inspection
by our QC department will credit or
replacement of umbrella be issued. It is
the customer’s responsibility to pay the
freight on return products or
replacement parts. ALL RETURNED
ITEMS MUST INCLUDE THE RA#
CLEARLY WRITTEN ON THE
RETURN PACKAGE or package will be
refused by our warehouse personnel.
NOTE: Damages and failure caused by
improper use due to neglect of reasonable
and necessary care are not covered by
this warranty.
Additionally, acts of nature (including but
not limited to wind, hurricanes, tornadoes,
and storms) are not covered by this
warranty.
Thank you for purchasing SimplyShade’s Bermuda Base Weights.
Please remove all contents from the package, inspect and review checklist.
CHECKLIST
P r i o r t o A s s e m b l y
Select area to set Cross Base Stand and place in desired location.
Moving the
umbrella will be difficult once fully assembled
. Be sure bottom pole stem is attached
to cross bar stand and cross bars are adjusted to 20” position.
DO NOT OPEN
UMBRELLA UNTIL WEIGHTS ARE SECURED.
S t e p 1
Remove 4 resin base weights from carton and lay on soft surface (Fig. 1). Remove
caps from each resin base weight by turning counter clockwise (Fig. 2) and fill with all
purpose sand (Fig. 3). Remove/clean any excess sand from base weight cap and
threads. Secure cap on container by turning clockwise.
NOTE:
Each resin base weight holds up to 55 lbs. of sand, 220lbs for all 4.
A
- (4) Resin Base Weights
B
- 220 lb. All Purpose Sand
(
not included
)
(Fig. 1)
(Fig. 2)
(Fig. 3)
(Fig. 5)
(Fig. 4)
S t e p 2
Place each resin base weight onto Cross Bar
Stand. Hook each section together so the resin
base weights are secured in place (Fig. 4).
Begin with middle sections first and work your
way out
(Fig. 5).
S A F E T Y P R E C A U T I O N S :
• To reduce risk of personal injury in which a person is injured or harmed, and/or
damage
to personal property, read and follow the Assembly Guide prior to
assembling and operating umbrella and base.
• Cross bar stand will not support umbrella without proper weight. Using the cross
bar stand without weight will damage your umbrella and may cause injury.
•
Close and store the umbrella in windy conditions or when a storm approaches.
Never allow the umbrella to flap in the wind; this could cause personal injury,
damage to personal property, damage to umbrella and/or umbrella canopy. Do not
use tilting function during windy conditions.
•
Keep umbrella secured to umbrella base at all times.
•
Do not leave open umbrella unattended. If damage occurs, this is not covered by
the warranty.
•
When adjusting the umbrella, make sure that no person(s), item(s) or personal
property are close to the umbrella. This is important to prevent injury or material
damage.
•
Do not allow children to play on or with umbrella or umbrella base.
•
When adjusting or assembling the umbrella or umbrella base, make sure fingers,
toes or any other parts of the body are clear from moving parts. Failing to do so
many result in serious injury.
A
-
B
-
220 lbs.
