BATTERY CONNECTION
If the charger does not connected properly, charging will not start, Make sure the charger is
connected to the battery and the connection points are clean and making a good connection
or make sure no reverse connections at the battery.
CHARGING COMPLETION
Charge completion is indicated by the charging status indicator turning on ( LED indicator
shows fully charged state) . This means that the charger has stopped charging. NOTE: If the
battery is not removed, the charger can detect the voltage. When battery voltage is lower
than 13.5V, the charger will charge for battery automatically.
MAINTAINGING A BATTERY
The unit maintains 12V batteries, keeping them at fully charged. It can charge small batteries
and maintain both small and large batteries. If you are maintaining a fully charged large
battery, you are properly utilizing the battery charger. However, if you use this battery charger
to charge a large battery, such as a marine deep-cycle battery, that was not fully charged,
you may lose some of the battery’s capacity. Therefore, we do not recommend charging a
large battery with this unit.
NOTE: The maintain mode technology utilized in this charger allows you to safely charge and
maintain a healthy battery for exhausted periods of time. However, problems with the battery,
electrical problems in the vehicle, improper connections or other unanticipated conditions
could cause excessive current draws. As such, occasionally monitoring your battery and the
charging process is recommended.
MAINTENANCE AND CARE
A minimal amount of care can keep your battery charger working properly for years.
• Clean the clamps each time you are finished charging. Wipe off any battery fluid that may
have come in contact with the clamps, to prevent corrosion.
• Occasionally cleaning the case of the charger with a soft cloth will keep the finish shiny
and help prevent corrosion.
• Coil the input and output cords neatly when storing the charger. This will help prevent
accidental damage to the cords and charger.
• Store the charger unplugged from AC power outlet, in an upright position.
• Store inside, in a cool, dry place. Do not store the clamps clipped together, on or around
metal, or clipped to the cables.
WARNING
1. It only can be used for 6/12V rechargeable AGM/STD/GEL/LION batteries.
2. The product should not be used under the water.
3. Ensure enough power supplying for the battery charger.
4. Never charging damaged battery in case of destroying battery charger.
5. To prevent potential danger, the battery charger should be away from heat object and
explosive gas during operation.
6. Do not change charger line or plug in order to avoid electric shock.
7. To prevent the battery charger from damage, the product should be away from children
and animals.
8. The battery charged needs to be checked to verify the input current beyond standard
output of charger.
