6
HEATER STAND AND LOCATION
•
The heater is for
outdoor use only. Always ensure that adequate fresh
air ventilation is provided.
•
Always maintain proper clearance to non protected combustible
materials, i.e. minimum of 100cm away from the top and minimum of
100cm away from the sides of the heater.
•
The heater must be placed on level firm ground.
•
Never operate the heater in an explosive atmosphere like in areas
where gasoline or other flammable liquids or vapours are stored.
•
To protect the heater from strong winds, anchor the base securely to
the ground with screws.
- 2 -
HEATER STAND AND LOCATION
The heater is primarily for outdoor use only. Always ensure that
adequate fresh air ventilation is provided.
Always maintain proper clearance to non protected combustible materials
i.e. top 100 cm and sides 100 cm minimum.
Heater must be placed on level firm ground.
Never operate heater in an explosive atmosphere like in areas where
gasoline or other flammable liquids or vapors are stored.
To protect heater from strong wind, anchor the base securely to the
ground with screws.
CEILING
WA
L
L
100 cm
10
0 c
m
GAS REQUIREMENTS
Use propane, butane or their mixtures gas only.
The pressure regulator and hose assembly to be used must conform to local standard codes.
The installation must conform to local codes, or in the absence of local codes, with the standard for the
storage and handling of liquid petroleum gases.
A dented, rusted or damaged tank may be hazardous and should be checked by your tank
supplier. Never use a tank with a damaged valve connection.
The tank must be arranged to provide for vapor withdrawal from the operating cylinder.
Never connect an unregulated tank to the heater.
LEAKAGE TEST
Gas connections on the heater are leak tested at the factory prior to shipment. A complete gas tightness
check must be performed at the installation site due to possible mishandling in shipment or excessive
pressure being applied to the heater.
Make a soap solution of one part liquid detergent and one part water. The soap solution can be applied
with a spray bottle, brush or rag. Soap bubbles will appear in case of a leak.
The heater must be checked with a full cylinder.
Make sure the safety control valve is in the OFF position.
Turn the gas supply ON.
In case of a leak, turn off the gas supply. Tighten any leaking fittings, then turn the gas supply on and re-
check.
Never leak test while smoking.
100cm
CEILING
W
ALL
100cm
LPG (LIQUEFIED PETROLEUM GAS) REQUIREMENTS
•
Use propane, butane or propane/butane mixture gas only.
•
The pressure regulator and hose assembly to be used must conform to local standard codes.
•
The installation must conform to local codes, or in the absence of local codes, with the standard for the
storage and handling of liquid petroleum gases.
•
A dented, rusted or damaged tank may be hazardous and should be checked by your tank supplier. Never
use a tank with a damaged valve connection.
•
The tank must be arranged to provide for vapour withdrawal from the operating cylinder.
•
Never connect an unregulated tank to the heater.
LEAKAGE TEST
Gas connections on the heater are leak tested at the factory prior to shipment. A complete gas tightness check
must be performed at the installation site due to possible mishandling in shipment or excessive pressure being
applied to the heater.
•
Make a soap solution of one part liquid detergent and one part water. The soap solution can be applied with a
spray bottle, brush or rag. Soap bubbles will appear in case of a leak.
•
The heater must be checked with a full gas cylinder.
•
Make sure the safety control valve is in the OFF position.
•
Turn the gas supply ON.
•
In case of a leak, turn off the gas supply. Tighten any leaking fittings, then turn the gas supply on and
re-check.
•
Never leak test while smoking.
Pyramid Gas Patio Heater_IM_Wowcher_A4.indd 6
Pyramid Gas Patio Heater_IM_Wowcher_A4.indd 6
12/05/2021 13:15
12/05/2021 13:15
